AGP Picks
View all

Crusher Consumables expands stock with rubber skirt strip and chute liners

Oct. 19, 2026
Crusher Consumables expands stock with rubber skirt strip and chute liners
By AI, Created 08:08 UTC, Oct 19, 2026, AGP -

Crusher Consumables in Sunnyrock, Germiston, has added rubber skirt strip and stud-backed rubber chute liner panels to stock for quarries and sand plants. The move targets transfer-point wear that can trigger spillage, cleanup time and downtime on South African crushing plants.

Why it matters: - Crusher Consumables is broadening its wear-parts offering beyond crusher liners to address transfer-point wear that can create spillage, cleanup work and avoidable downtime. - The new stock gives quarries and sand plants faster access to parts used on conveyors and chutes, where wear often shows up outside the crusher chamber.

What happened: - Crusher Consumables of Sunnyrock, Germiston, added rubber skirt strip and stud-backed rubber chute liner panels to the stock it keeps on the shelf. - The parts are aimed at quarries and sand plants across South Africa. - The company said the products are intended for crusher transfer points, where stone drops from chutes onto conveyors.

The details: - Skirt strip is available in a black natural rubber and styrene-butadiene rubber blend at about 60 Shore A for general duty. - A softer natural gum version at about 40 Shore A is available for belts carrying sand and fines. - Skirt strip comes in thicknesses from 10 mm to 20 mm and widths from 150 mm to 300 mm. - The material is sold in 10 m and 20 m rolls or cut to length in the yard, with pricing on request. - Chute liner panels use 40 Shore A natural rubber vulcanised onto a 6 mm steel backing plate with M20 studs. - The chute liners are available as 500 x 500 mm full panels and 500 x 250 mm half panels for edges. - Full panels weigh roughly 19 kg or 26 kg, which makes individual replacements courier-friendly. - Buyers are asked to provide belt width and skirt length per side, or chute dimensions and stud hole centres for panels. - Photos of worn rubber can help identify whether the compound or the installation position is causing the problem. - Single panels usually go by courier overnight or in two days to main centres. - Full chute sets travel on the regular truck run.

Between the lines: - Crusher Consumables is positioning rubber as a practical option for wet fines and moderate-impact transfer points, not as a universal wear solution. - The company says rubber does not belong under a primary jaw or in a run-of-mine tip, where sharp rock above about 150 mm can cut it quickly. - The company also says natural rubber swells in diesel or hydraulic oil, so polyurethane is a better fit near leaking power packs. - Material hotter than about 70 °C rules rubber out, which narrows the use case to cooler transfer areas. - The parts operations manager at the Sunnyrock yard said skirt strip should rest lightly on the belt and be softer than the belt top cover, or it can cut grooves into the belt and still leak. - Rubber is quieter than bare steel, which matters on plants where crews work beside transfer points for full shifts.

What's next: - Crusher Consumables will continue selling the new stock from its Sunnyrock parts yard and through its Gauteng, Durban, Cape Town, Gqeberha, Bloemfontein and Mbombela showrooms. - The company will likely see demand from secondary and tertiary crusher circuits and sand plants, where wet fines and lower lump sizes make rubber a better fit. - Buyers needing immediate replacement parts can use courier delivery for single panels or the regular truck run for larger sets.

The bottom line: - Crusher Consumables is betting that easier access to skirt strip and chute liners will help plants cut spillage, reduce cleanup and keep transfer points running cleaner.

Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.

Sign up for:

Pretoria Press Daily

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.

Share this page:

Advanced Search Options

Search for:

Search scope:

Type:

Search in:

Date range:

The last

Sort by:

Sign up for:

Pretoria Press Daily

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.